- Service & Parts
- About Us
2019 GALVANIZED STEEL DUMPBOX 12 FT CONTRACTOR’S TANDEM AXLE (14,000LBS GVW)
83” X 12 FT W/ADDITIONAL OPTIONS:
-L.E.D. LIGHTS full LED package
-LOW PROFILE – easier to load, 24” high deck
-CUSTOM AIRFLOW THROUGH TARP AND SIDE BOARD PROTECTION Custom airflow through tarp with front housing shield that protects tarp from elements and debris. Locking mechanism at rear of dumpbox. Tarp has metal eyelets every two feet and there are tarp tie down hooks around the top of the box for ease of ensuring no escaping of the dumpbox contents.
-2 WAY END GATE Opens barn door style for loading of equipment or dumping contents (if dumping, there are door hold backs to hold the doors to the side of trailer to prevent damaging doors which would come in contact with the ground if dumpbox is fully raised). The end gate has spreader chains and a locking lever so can control spreading or dumping of material.
-SAFETY STAND LOCK – ATTACHED TO SCISSOR LIFT SYSTEM (PROTECTION WHILE SERVICING)
– SPARE TIRE MOUNT – with locking mechanism, prevents theft
-HEAVY DUTY SCISSOR LIFT SYSTEM W/GREASEABLE PIVOT POINTS, structurally designed to safely lift load of trailer, comes with grease zerks on all moving parts (rated for 18,000lbs)
-8” I-BEAM TONGUE AND MAIN FRAME – ON FLOOR W/16” CENTERS ON CROSSMEMBERS – BUILT TOUGH TO WITHSTAND RUGGED USE
-4 TIEDOWN IN CORNERS – easily secure equipment or cargo with chains or straps
-FLOOR -10 GUAGE – FULL SEAM WELDS Floor and sides are heavy duty 10 gauge, with rib formed sides and full seam welds, no day light showing through the floor as in some other manufacturer’s models
-SIDES, 10 GUAGE – 24” HIGH, RIB FORMED FOR EXTRA STRUCTURAL STRENGTH
-STAKE POCKETS built into all sides for the ability to add 2 ft, 3 ft or 4 ft side extensions.
-HEAVY DUTY DIAMOND PLATED FENDERS built strong to withstand tough usage
-2 5/16” HEAVY DUTY COUPLER (ADJUSTABLE HEIGHT) 3 place adjustments for ensuring correct height of trailer
-WIRED REMOTE CONTROL W/ MAGNETS come with 12ft of cord, so when at rear or side of trailer, simply attach to the box
-ELEC/HYDRAULIC SYSTEM WITH -IN-LINE FUSE PROTECTION ON CHARGING SYSTEM, ALL COMPONENTS STORED IN -FRONT LOCKING TOOLBOX USA made with 3200 lbs working pressure (this determines lifting capacity, as other manufacturers utilize inferior power units). In line fuse protections prevents burnout/damage to power unit from electrical surges from towing vehicle. High output 12 volt deep cycle battery with the ac/dc direct charge unit maintains full charge on the battery and prevents the battery from freezing in the winter
-AC/DC DIRECT CHARGE ACCESSORY, mounted inside of toolbox with outside plug in, charges up battery when 110 AC plugged in
-10,000LB(12,000LBS STATIC) DROPLEG JACK W/SIDE CRANK greaseable
-HEAVY DUTY SLIDE IN RAMPS (6 FT 6IN x 16”) /W/ LOCKING CABINETS
-2 – 7,000LB ROCKWELL AXLES W/ BRAKES AND EZEE LUBE HUBS, SELF-ADJUSTING No need to occasionally jack up trailers to set brakes as they automatically adjust on forward stops. This is a safety feature with brakes always properly adjusted and will help your brakes last longer. -WET BOLT KIT EQUALIZER LUBRICATION, allows for lubrication of suspension – Save $$$$
-MODULAR WIRING – SEVERE ROAD WIRING PACKAGE UPGRADE State of the art wiring, no plastic clips joining wires, lights, etc Comes with breakaway battery wiring kit.
-COLD WEATHER WIRING HARNESS UPGRADE Certified to -85C, never stiff and sealed
-FULL GVW RADIAL TIRES ST235/80/R16 W/ SILVER MOD WHEELS
-HOT DIPPED GALVANIZED – Steel is a wonderful material, but it can be corroded by the elements and air pollution. Hot-dip galvanizing protects steel from corrosion and in an environmentally friendly manner and considerably increases its lifetime. SAFEGUARDS YOUR INVESTMENT
-3 YEAR STRUCTURAL WARRANTY
STOCK # 000361
WEIGHT 3880 LBS