2024 LOAD TRAIL LOW PROFILE DUMP TRAILER(21,000LBS) DL16

4C’s is the ONLY company with a price match guarantee - If no one beats our price, or we give you $500, bring in a quote, and we will show you the difference. UNLIKE OTHER DUMPBOXES THAT ARE BUILT LIKE A TIN-CAN; THAT HAVE 12 GAUGE SIDES AND NEXT TO NO STRUCTURAL SUPPORT UNDER FLOOR, OBVIOUS STRUCTURAL DEFICIENCIES AND WARRANTY THAT THEY DO NOT WANT YOU TO KNOW ABOUT -load trail trailers are built to work. Give us a call, the people who build custom trailers and major manufacturers won't!

2024 DUMPBOX 16FT CONTRACTOR’S MODEL LOW PROFILE TRIPLE AXLE(21,000LBS GVW – LIFTING CAPACITY) 83” X 16FT W/ADDITIONAL OPTIONS:

SPECIFICATIONS:

-LOW PROFILE – 28” DECK HEIGHT, much easier to load equipment

-L.E.D. LIGHTS full LED package

-CUSTOM AIRFLOW THROUGH FRONT MOUNTED TARP ASSEMBLY Custom airflowthrough tarp with front housing shield that protects tarp from elements and debris. Locking mechanism at rear of dumpbox. Tarp has metal eyelets every two feet and there are tarp tie down hooks around the top of the box to ensure no escaping of the dumpbox contents.

-MAX FRONT LOCKING TOOLBOX(with divider) – extra large, rear section houses battery, hydraulic components, front section open for chains, boomers, straps etc – greaseable hinges

-2 WAY END GATE Opens barn door style for loading of equipment or dumping contents (if dumping, there are door holdbacks to hold the doors to the side of the trailer to prevent damaging doors which would come in contact with the ground if the dump box is fully raised). The end gate has spreader chains and a locking lever so you can control spreading or dumping of material.

 -SAFETY STAND LOCK (PROTECTION WHILE SERVICING)

 -SPARE TIRE MOUNT – with locking mechanism, prevents theft

30” MAX STEP – DRIVER’S SIDE FRONT – easy access to tarp and inside dumpbox

-HEAVY-DUTY SCISSOR LIFT SYSTEM W/GREASEABLE PIVOT POINTS, structurally designed to safely lift a trailer's load, comes with grease zerks on all moving parts. 21,000LBS LIFTING CAPACITY.

-10” I-BEAM MAIN FRAME, 2” X 6” C CHANNEL OUTSIDE FRAME W/3” X 3” SQUARE TUBING CROSSMEMBERS(16” CENTERS ON CROSSMEMBERS) – BUILT TOUGH TO WITHSTAND RUGGED USE

-4 - 4” D-RINGS INSIDE FOUR CORNERS OF BOX (upgrade) - able to safely secure equipment/cargo

-FLOOR -10 GAUGE – FULL SEAM WELDS Floor and sides are heavy duty 10 gauge, with rib-formed sides and entire seam welds, no daylight showing through the floor as in some other manufacturer’s models

-SIDES 10 GAUGE – 24” HIGH, RIB FORMED FOR EXTRA STRUCTURAL STRENGTH

-STAKE POCKETS are built into all sides, allowing you to add 2 ft, 3 ft, or 4 ft side extensions.

-SIDE BOARD PROTECTION – 2” x 6” side boards w/metal brackets, protects against damage when loading with loader

-HEAVY DUTY DIAMOND PLATED FENDERS - built strong to withstand strict usage

-2 5/16” HEAVY DUTY COUPLER (ADJUSTABLE HEIGHT) 5 place adjustments for ensuring the correct height of the trailer

-REAR DROPDOWN SUPPORT STANDS(2” X 2” SQ TUBING/FOOT PAD) load equipment without being hooked up to the vehicle

-WIRED REMOTE-CONTROL W/MAGNETS comes with 15 ft of cord, so when at the rear or side of the trailer, attach it to the box

-ELEC/HYDRAULIC SYSTEM WITH -IN-LINE FUSE PROTECTION ON CHARGING SYSTEM, ALL COMPONENTS STORED IN FRONT LOCKING TOOLBOX. USA-made with 3200 lbs. working pressure (this determines lifting capacity, as other manufacturers utilize inferior power units). In-line fuse protection prevents burnout/damage to the power unit from electrical surges from the towing vehicles. A high-output 12-volt deep cycle battery with an AC/DC direct charge unit maintains full charge on the battery and prevents it from freezing in the winter. COMES W/EMERGENCY DOWN CONTROL– if the fuse goes in the towing vehicle, then the dumpbox battery will not charge, and after the battery is nearly drained, the dumpbox will go up but will not be able to come down due to the battery drained. This allows for moving the dumpbox until the fuse is replaced in the towing vehicle.

-RAPID WALL BATTERY CHARGER 5 AMP, charges up battery when 110 AC plugged in

-2 -10,000LBS (12,000lb static) SPRINGLOADED DROPLEG JACKS -W/SIDECRANK - greaseable gears, easy to crank up when loaded

-HEAVY DUTY SLIDE IN RAMPS (80” x 16”) W/ LOCKING CABINETS – rated at 12,000lbs

-2 – 7,000LB DEXTER AXLES W/BRAKES AND EZEE LUBE HUBS, SELF ADJUSTING No need to occasionally jack up the trailer to set brakes as they automatically adjust on forward stops. This is a safety feature with brakes always properly adjusted and will help your brakes last longer.

-MODULAR WIRING—SEVERE ROAD WIRING PACKAGE UPGRADE State-of-the-art wiring, no plastic clips joining wires, lights, etc. Comes with a breakaway battery wiring kit.

-COLD WEATHER WIRING HARNESS UPGRADE Certified to -85C, never stiff and sealed

-FULL GVW RADIAL TIRES ST235/80/R16, rated to more than the trailer

-POWDURA ONE CURE EPOXY PRIMER – provides superior adhesion and durability to topcoat

-BLACK – GLOSS POLYESTER POWDER COATED PAINT (2 YR WARRANTY)

- 2-3-2 WARRANTY PACKAGE INCLUDING ROADSIDE SERVICE FOR BOTH TRAILER AND TOWING VEHICLE – BEST WARRANTY IN THE INDUSTRY- NO OTHER MANUFACTURER COMES CLOSE, OTHERS HIDE BEHIND LIMITED WARRANTY, COSTING YOU BIG $$$ IN THE LONG TERM

SPARE TIRE/RIM $320  

STOCK # 325467

WEIGHT 4673 LBS